TeamStreet™

• No irritating fumes or burning
• Deep, black color
• Coverage: 70 to 80 square feet per gallon, 2 coats recommended
• Fortified with sand for safe, non-skid surface and durability

• 100% acrylic electrometric pourable crack sealant
• Designed for sealing cracks up to 1/2" wide in asphalt or latex/rubber track surfaces
• Coverage: 1 gallon will fill approximately 280 feet of 3/8" wide X 3/8" deep crack

• Anionic asphalt emulsion designed for use as a tack coat patching, paving, and coating
• Dries black
• Apply with spray equipment, brush, or squeegee
• Mixing and Coverage:

  Primer for Coatings	Tack Coat for Patching or Paving
  1 part Tack Coat	1 part Tack Coat
  8 parts water	1 part water
  90 - 130 sq. ft. per gallon when diluted	90 - 130 sq. ft. per gallon when diluted

• Rubberized, anionic crack sealant
• Polymers are added to provide flexibility during hot and very cold temperatures
• Fortified with mineral fillers for added strength
• SuperFlex performs like a hot applied crack sealant
• One gallon will fill approximately 75 - 150 feet of crack depending on depth and width of crack
• SuperFlex can also be used for repairing alligatored pavement areas. Just add up to 500 lbs. of silica sand (40 - 60 mesh) to a 55 gallon drum (9 lbs. of sand per gallon of SuperFlex)

• Rubberized, anionic crack sealant
• Recommended for cracks up to 1/2" wide
• Cold applied right out of the barrel - NO HEATING REQUIRED
• One gallon will fill approximately 75 - 150 feet of crack depending on depth and width of crack

• Use as is, no dilution necessary
• Designed for filling larger cracks up to 1" wide in concrete surfaces
• Coverage: 75 to 150 feet per gallon depending on depth and width of crack

• Conveniently packaged in 50 lb. weatherproof bags
• Can be applied in any weather
• Fills potholes in asphalt or concrete
• No mixing required. Pour from bag and tamp into place
• One 50 lb. bag will cover approximately 5 square feet at 1" depth or 2.5 square feet at 2" depth

T13

GatorPave

• Trowelable or apply by squeegee
• Ideal for repairing alligatored areas in asphalt surfaces as well as cracks in excess of 1/4" wide
• No dilution required

T14

Settle Down

• Contains calcium chloride
• Premium dust suppressant
• No dilution required

T15

Base One®

• Used for stabilization, construction and reconstruction of gravel roads
• Increases density, stability and durability
• Increases load-bearing capacity
• Non-corrosive and non-polluting
• Decreases potholing, wash boarding and grading
• Saves on maintenance costs

• Use when applying magnesium or calcium chloride for immediate penetration deeper into the roadbed with greatly reduced run-off
• Reduces frequency of reapplication when watering roads for dust control
• Stops dusting while street sweeping
• Non-corrosive, safe for plants

• Available in white or yellow
• One gallon will cover 325 feet of 4" line at 15 mils wet thickness
• Dries in 10 to 20 minutes (dry time varies depending on weather conditions)
• Glass beads can be used in paint for increased visibility at night
• Bright and durable formula
• Solids (by weight) 57-59%

• Available in white or yellow
• Meets Federal Specification TTP-1952b for acrylic waterborne traffic paint
• One gallon will cover 325 feet of 4" line at 15 mils wet thickness
• Dries in 5 to 15 minutes (dry time varies depending on weather conditions)
• Glass beads can be used in paint for increased visibility at night
• Bright and durable formula
• Solids (by weight) 64-66%

• Available in white or yellow
• One gallon will cover 325 feet on 4" line at 15 mils wet thickness
• Dries in 1 to 10 minutes (dry time varies depending on weather conditions)
• Superior durability and enhanced retention of glass beads - glass beads can be used in paint for increased visibility at night
• Meets and exceeds TTP-1952D Federal Specification
• Solids (by weight) yellow 76.5%, white 77.5%

NOTE: If using spray equipment, must have stainless steel components

• Available in white or yellow
• One gallon will cover 271 feet of 4" line at 20 mils wet thickness
• Dries in 1 - 5 minutes (dry time varies depending on weather condition)
• Extremely durable - new acrylic technology provides strength normally associated with thermoplastics and epoxies
• Glass beads can be used in paint for increased visibility at night
• Solids (by weight): yellow 76.5%, white 77.5%

• Designed for ADA compliance
• One gallon will cover 325 feet of 4" line at 15 mils wet thickness
• Vibrant and durable formula

• Bright and highly visible
• For use on firelane areas in parking lots
• One gallon will cover 325 feet of 4" line at 15 mils wet thickness

• Black 100% acrylic marking paint designed for blocking out unwanted lines
• Ideal for changing traffic patterns on parking lots